Quick Guide To Install RV Solar Panels
Take the first step to installing solar panels on your RV to determine how much energy you need. This amount will be determined or installing signs. Make sure the plate on the roof of your RV fixed.
The next step is to collect tools and parts. Get your disks, do not forget to buy the mountains and screws. You must be drilled, some sealing, connecting cables and laser eyes. Remember the solar regulator terminal or junction box to get.
You must ensure that any other source of electrical power from. Including the coach map generator and shore power battery. It is strongly recommended to cover the solar panel. This may be paper, cardboard, or even place a small tarp. The solar panel generates costs, and you can shock during installation.
Now that everything is fine, and tools on the right, you’re ready when it is based on the vehicle roof. It is recommended that you drive next to a container, like a chimney. While you can change the wiring down. Remember that the panel at least 8 inches from the edge of the roof.
The next step, the holes for the brackets, is now in the internal cables. Install devices for the screws and fill the blanks with the Seals. You are now ready to drive the device to install. Not scratch or chip. Make sure it is securely fastened to the brackets.
Now that solar panels are properly mounted on the roof of a motorhome, you’re almost ready for its own electricity. You need a place to your device questions. When the terminal in a safe place to bring the son of the terminal roof. Then, the students arrive at the terminal so that the correct polarity requirements.
The final phase of the son of the battery connection. close to the terminal of your battery. If all you’re ready to take power.
